The common problem of aluminum alloy saw blade is that it is easy to produce burrs during cutting. Generally, when cutting or after cutting for a period of time, because the saw blade is not sharp or the saw blade is asymmetric during grinding, especially when grinding at a 45 degree angle, one side is more and the other side is less, the force on the saw blade is uneven during cutting, and it is easy to produce burrs by extrusion.
As we all know, the diameter of the saw blade is related to the sawing equipment used and the thickness of the sawing workpiece. The diameter of the saw blade is small and the cutting speed is relatively low; The diameter of the saw blade is large, which requires higher requirements than the saw blade and sawing equipment, and the sawing efficiency is also high. The outer diameter of the saw blade is selected according to different circular saw machine models, and the saw blade with the same diameter is used.
Professional plywood saw blade is composed of two pieces, that is, a set. Each set of saw blades is divided into three left and one right toothed saw blade and three right and one left saw blade. The usual plywood sawing machine installs four pieces at a time, that is, two sets. There are also eight pieces, that is, four sets of plywood saw blades. The tooth profile of professional plywood saw blade not only achieves the cutting accuracy and smoothness, but also improves the cutting efficiency, so it is favored by the market.