In this case, we still suggest that we try not to use it in general. Even if used, the effect is not very good.
Because the equipment installed on the aluminum cutting saw blade is different from that of the woodworking saw blade. Of course, the rotating speed of the equipment is also different. As we all know, due to friction heating, the thermal conductivity of wood is very poor. When the saw blade rotates at high speed, the heat will quickly concentrate on the cutting part, so it is easy to burn the saw blade.
However, the thermal conductivity of aluminum alloy saw blade is better than that of woodworking saw blade. Under normal cutting, the heat will be quickly transmitted to the whole aluminum alloy material, so it is not easy to burn the saw blade.
Due to the different materials of aluminum and wood materials, different saw blade specifications and tooth shapes need to be selected. In order to prevent adhesion, the aluminum cutting saw blade generally uses ladder flat teeth to cut, that is, often referred to as high and low teeth and flat ladder teeth. The wood cutting saw blade mostly uses left and right teeth. The left and right teeth are suitable for cutting all kinds of soft wood, hard wood, particleboard and other wood.
If the materials to be cut are single and double veneered wood-based panels, fireproof boards and other materials, it is recommended to use the forest industry saw blade with ladder flat teeth instead of the left and right teeth. During sawing, the cracking phenomenon of veneer can be reduced and higher sawing quality can be obtained.